Solar 240 LED COB road lamp with PIR motion sensor cool white

Solar 240 LED COB road lamp with PIR motion sensor cool white

Are you looking for an efficient, economical and environmentally friendly solution for lighting outdoor areas? Introducing the Solar 240 LED COB Street Light with PIR Motion Sensor and Cool White Light – a superior solution for illuminating driveways, yards, gardens, parking lots, roads and other outdoor areas. This innovative light combines the power of solar energy with advanced COB LED technology and a smart motion sensor, providing optimal lighting exactly when you need it, while reducing energy consumption.

The large solar street light on offer is an excellent and ecological source of energy for every home. It is enough to install it anywhere where there is access to solar energy for it to perform its function. The device is great for lighting courtyard areas, as well as squares, streets, sidewalks, alleys, gardens and terraces.

The flashlight is waterproof, safe and efficient. It is intended for outdoor use and must be exposed to sunlight during the day for the battery to charge effectively. The flashlight has a COB LED panel, thanks to which the light is very bright and powerful, which gives excellent visibility and has a positive effect on the comfort of use.

The device is powered by an internal battery, which is charged via a solar panel.

The solar lamp only needs 8-10 hours of sunlight per day to fully charge, depending on the time of year. No wires are required. The kit provides an economical, low-emission and environmentally friendly modern solution.

A modern polycrystalline solar panel with a large surface area mounted on the upper part of the housing ensures high efficiency and charging speed.

The street lamp is made of high-quality plastic, which ensures its IP67 protection. The device is therefore a waterproof product, which means that it will not be damaged in the event of precipitation and high humidity. It works without problems both in winter and on cloudy days.

It has a built-in motion and twilight sensor, thanks to which it will only light up at night when it detects movement in the immediate vicinity. There is also an on/off switch.

Easy installation is ensured by the mounting pins included in the kit. They allow for quick and easy permanent mounting of the lamp to any surface, whether concrete or wood. The target can be a wall, beam or fence.

REMOTE CONTROL + 4 OPERATION MODES - the lamp can be conveniently operated with the remote control. It has on and off buttons and 4 switching modes. ON - Enable - OFF - Disable MODE 1 - Mode 1: When motion is detected, the light will shine at 30% of maximum power for 30 seconds. MODE 2 - Mode 2: When motion is detected, the lamp shines at 30% of maximum power for 50 seconds. MODE 3 - Mode 3: When motion is detected, the lamp shines at 30% maximum power for 100 seconds. SOS - The SOS button turns off the motion sensor and the twilight sensor, the light stays on continuously until the battery is drained to about 50-70% power.

WATERPROOF + SOLAR PANEL – the lamp is waterproof, so adverse weather conditions do not affect its operation. It has a waterproof class IP6 7. The solar panel and rechargeable battery provide power that allows the device to be used without maintenance. It does not need an additional source of energy, it is economical and economical.

PIR MOTION AND DUSK SENSOR – the lamp has a motion sensor that turns on the lighting when it detects activity in the detector's operating area. The dusk sensor responds to changes in lighting and activates the lamp in case of insufficient light.

EASY INSTALLATION - the lamp can be attached easily and quickly with the pins included in the set, according to the individual needs of the room and floor (e.g. wall, fence, beam).

color: black

light color: cool white

Material: ABS + plastic

lamp from 16 segments with 1 and 5 LEDs in each

LED quantity: 240 COB

waterproof: IP6 7

motion detector range: 5 m

battery: 2 x 1500mah

working hours: spring summer: 6-8 h; in winter: 8-10 hours

voltage: 5V

power: 72 W

energy consumption: 2 Kwh

light angle: 120 °

luminous flux: 800 lm

tilt adjustment: vertical: 180 °, horizontal 170 °

panel dimensions (width/height): 27 x 14,5 x 2,5 cm

total height :  41 cm

weight: 0,550 kg

Brand and responsible person for the EU:

MALATEC

Our company imports huge quantities of goods into our warehouses, so we can provide our customers with a short delivery time that other wholesalers of Chinese products do not offer. Not many goods are imported into warehouses in Poland at low prices and cannot offer customers such favorable prices as we do. Our experience and network of trade contacts with manufacturers, as well as direct import of products from foreign factories, ensure a high price-quality ratio. We have extensive experience in importing goods from China and enjoy great recognition among customers. We strive to ensure that the goods from China that we import are in line with current purchasing trends prevailing in our country. After each delivery, we include new products in our offer. To make it easier for customers to find interesting products, we have divided our website into the following categories: tablet accessories, consoles and computers, home and garden, business, gadgets, games, instruments and accessories, fireplace accessories, automotive, multimedia, lighting, clothing, footwear and jewelry, sports and fitness, phones and accessories, tourism and recreation, beauty, health, animals.ISO TRADE Spółka z oo Hangarowa 15 59-220 Legnica POLAND +48 666 002 003 b2b@maxy.eu

Instructions for use

Instructions for use of the product:

1. Choice of Location:
   • Choose a location where the solar panel will receive maximum direct sunlight at least 6-8 hours a day. Avoid shady places (under trees, roofs, in the shade of buildings) as this will reduce the efficiency of battery charging.
   • Please note that the location must also be suitable for illuminating the desired area and within range of the PIR motion sensor.
2. Marking and Drilling Holes:
   • Hold the lamp (or its holder, if separate) in the chosen location and use a marker to mark the places to drill the holes.
   • Drill holes at the marked locations using a drill bit suitable for the material (brick, concrete, wood, etc.).
3. Inserting Inserts:
   • Insert the plastic inserts (wall inserts), which are usually included, into the drilled holes.
4. Attaching the lamp:
   • Position the lamp so that the holes on the lamp/bracket align with the inserts.
   • Use the included screws to firmly screw the lamp to the wall, pole or other surface. Make sure the lamp is securely attached and stable.
5. Angle adjustment (if possible):
   • Some models allow you to adjust the angle of the lamp. Adjust it so that the light optimally covers the desired area.

Application:

1. Switching on the lamp:
   • Before first use, and after installation, find on/off button on the flashlight (usually on the front or bottom). Press it to turn on the flashlight. You may need to hold the button for a few seconds or press it multiple times to select a mode.
   • The flashlight will charge during the day and start working automatically at night when it gets dark.
2. Operating Modes (if available):
   • Most solar lights with a motion sensor offer different operating modes that you select by repeatedly pressing the power button:
     • Mode 1 (Full brightness when moving, off otherwise): The lamp is turned off at night, but turns on at full power for a certain time (e.g. 15-30 seconds) when motion is detected.
     • Mode 2 (Low light + full brightness when moving): The lamp shines with a weak light at night, and when motion is detected, it turns on at full power for a certain time, then returns to a weak light.
     • Mode 3 (Constant low light at night): The lamp shines with a constant low light all night long, regardless of movement. (Less common with models with a PIR sensor, but possible.)
   • Select the mode that best suits your needs. Indicator lights often indicate the selected mode.
3. Automatic Operation:
   • The flashlight will automatically charge the battery during the day.
   • At night, when darkness falls (light below a certain limit), the motion sensor will be activated and the lamp will operate in the selected mode.

Useful tips

Useful tips for assembly:

• Optimal Sun Exposure: Make sure the solar panel is not shaded by trees, bushes or other obstacles. Regularly clean any dirt or snow on the panel as this reduces charging efficiency.
• First Charging: Before first use, leave the lamp in the sun for at least 10-12 hours to fully charge the battery.
• Motion Sensor Orientation: Make sure the PIR sensor is pointed towards the area where you expect movement. Avoid pointing the sensor towards heat sources (e.g. vents, air conditioners) as this may cause false alarms.
• Winter Efficiency: During the winter months, when there is less sunlight and the days are shorter, the lamp's operating time may be reduced. This is normal for solar devices. Make sure the panel is clear of snow.
• Do not use in enclosed spaces: The flashlight is intended for outdoor use only, as it requires sunlight to charge.
• Regular Cleaning: Periodically wipe the solar panel and LEDs with a soft, damp cloth to remove dust, dirt, and bird droppings. This will maintain optimal performance.
• Attachment: Make sure the lamp is firmly attached to prevent it from falling in strong winds.

Warnings

Warnings:

• Correct Installation: Place the lamp in a location where it will receive enough sunlight to charge. Improper placement will reduce its effectiveness.
• Safety during installation: Use appropriate protective equipment (e.g. safety glasses) when drilling and installing. Make sure you do not drill into electrical cables or water pipes.
• Do not look directly into the light: The light from COB LEDs is very strong. Never look directly into the lit lamp as this may damage your eyesight.
• Battery Safety: The built-in battery is non-replaceable for the average user. Do not attempt to open or replace it. Also, do not throw the flashlight into a fire or expose it to extreme temperatures, as the battery may explode.
• Environmentalism: At the end of the product's life, recycle it properly. Batteries contain substances that are harmful to the environment and must be disposed of in accordance with local regulations.
• Injuries: Do not use a damaged lamp. In case of damage, contact the retailer or an authorized service center.
• Children and Pets: Place the lamp at a height that is out of reach of small children and pets.
• Cleaning: Before cleaning, make sure the lamp is switched off (if it has this function). Use only a dry or slightly damp cloth. Do not use aggressive cleaning agents or solvents.