39,99 € with tax
Product in our warehouse 🏠
14 days product return deadline 📦
Guaranteed quality ✅
Free delivery on prepayment 🚚
12 months warranty service ⭐
Delivery within 24 hours during working days 🚀
In Stock
Description
Set RGB LED strip 10m motion detector and controller IP44 Brilite
LED strip can be used for special lighting and mood lighting. Also perfect as indirect lighting in the dining room, living room, bedroom, at the table or as TV lighting. Thanks to the IP 44 protection class, the tape is also protected against water splashes. The self-adhesive LED strip can be easily attached to any clean, dry and smooth surface. The strips can be flexibly shortened at the end at the attached cut edges.
The included remote control contains 16 different colors (RGBW) and 8 dynamic light modes and a DIY mode. You can dim the brightness or color intensity with additional buttons.
To activate sensor mode, press the corresponding sensor button. As soon as movement is detected in the detection area, the LEDs on the strip are activated. The light stays on for the selected time (30s/60s/120s/360s) and then turns off automatically. Note that the PIR sensor only works in the dark.
Protection class: IP44 - strap only
Protection class: IP20 – power supply and connection cable
Light color: RGB = all colors possible
Voltage: 24 volts
Power consumption: 26 watts
Dimming: Yes, with remote control
Luminous flux in lumens: 800 lm Color
rendering: Ra>80
Beam angle: 120 °
Switching cycles: >15.000 x
Lifetime: >35.000 h
Energy efficiency class: A+
– With PIR motion detector
– LED strip flexible Can be shortened by 17 cm each
– Color change and dimming with remote control
– Including 1,5m cable and controller Scope
2 x 5 meter LED strip
1 x 44 button remote control
1 x connection cable with built-in motion detector and receiver
1 x plug-in power supply
Additional details
| Weight | 1 kg |
|---|---|
| Dimensions | 25x20x15 cm |
Responsible person for the EU:
Responsible person for the EU:
MÜLLER-LICHT
Reviews (22)
22 reviews for Set RGB LED strip 10m motion detector and controller IP44 Brilite
| 5 star | 77% | |
| 4 star | 9% | |
| 3 star | 9% | |
| 2 star | 4% | |
| 1 star | 0% |
Only registered users who have purchased this product can write a review.
Returns and warranty period
You might also like it…
Similar products
Anonymous (Verified Product Buyer) -
clamp (Verified Product Buyer) -
Anonymous (Verified Product Buyer) -
Sergej Potočnik (Verified Product Buyer) -
Mojca L. (Verified Product Buyer) -
Anonymous (Verified Product Buyer) -
Marta (Verified Product Buyer) -
Damian cat (Verified Product Buyer) -
Anonymous (Verified Product Buyer) -
It doesn't shine very bright, the strips come from the same beginning, so you can't make a 10m strip unless you have a straight 5m socket.
Saša Veselka (Verified Product Buyer) -
calm keber (Verified Product Buyer) -
Nataša S. (Verified Product Buyer) -
Vesna (Verified Product Buyer) -
Satisfied with the product and also with the correct attitude of the provider. Good luck and good luck in 2023!
Daniel (Verified Product Buyer) -
It works well and all the LEDs shine equally brightly, the cable is correctly dimensioned. The connection to the tape is not exactly marked, you have to try to connect it, there is nothing to break, otherwise it will not work. Satisfied.
Vesna Chop (Verified Product Buyer) -
Irma Vuk (Verified Product Buyer) -
Anonymous (Verified Product Buyer) -
Anonymous (Verified Product Buyer) -
Super!
Marina Bandova (Verified Product Buyer) -
primož janežič (Verified Product Buyer) -
Anonymous (Verified Product Buyer) -
the lights are great, I just need some kind of extension to be able to install more of them
Stanko Rep (Verified Product Buyer) -
Very satisfied