10x solar floor LED warm white garden lamp 37cm

10x solar floor LED warm white garden lamp 37cm

Transform your outdoor spaces into a beautifully illuminated oasis with our set of 10x Solar Ground LED Warm White Garden Lights 37 cm long! These elegant and functional lights are the perfect solution for illuminating paths, flower beds, driveways, patios and other garden areas, as they combine the beauty of warm white light with the economy and environmental friendliness of solar energy.

free of charge – thanks to the solar cell and battery, the 10 solar garden lights operate exclusively on solar energy, which means no cables and no additional electricity costs

Durability in harsh weather conditions – the built-in solar lights are waterproof to IP44 standard, meaning they are resistant to rain, snow and moisture, ensuring reliable operation all year round

Candle all night long – when fully charged, the waterproof solar garden lights burn for up to 8 hours and provide energy-saving lighting all night long

Very easy to install - thanks to the built-in spike and automatic dusk sensor, the solar garden lights are ready for use in 10 seconds - without cables or tools!

They will provide enough light - modern LEDs emit warm white light that subtly illuminates paths, terraces and gardens and creates a pleasant atmosphere

Complies with European standards – LED solar garden lights have been tested for compliance with European standards, so you can be sure they are safe!

• in accordance with European standards
• energy-saving LED solar lamps
• Solar energy
• for free
• resistant to adverse weather conditions
• 10 lamps in a set
• mechanical ON/OFF switch
• A tip for sticking into the soil or pot is included.
• universal use
• easy and quick installation
• twilight sensor
• light source: LED
• packed in a colorful box
• battery: 100mAh / 1,2V
• lighting time: 8 hours
• water resistance: IP44
• length of the tip to be inserted: 12 cm
• Dimensions of one lamp: 37 x 5,5 cm
• Dimensions in packaging: 23 x 17 x 9,5 cm
• weight of one lamp: 0,065 kg
• set weight: 0,664 kg
• light color: warm white
• material: PP + PS + glass
• 10 solar lamps

Responsible person for the EU:

MALATEC

Our company imports huge quantities of goods into our warehouses, so we can provide our customers with a short delivery time that other wholesalers of Chinese products do not offer. Not many goods are imported into warehouses in Poland at low prices and cannot offer customers such favorable prices as we do. Our experience and network of trade contacts with manufacturers, as well as direct import of products from foreign factories, ensure a high price-quality ratio. We have extensive experience in importing goods from China and enjoy great recognition among customers. We strive to ensure that the goods from China that we import are in line with current purchasing trends prevailing in our country. After each delivery, we include new products in our offer. To make it easier for customers to find interesting products, we have divided our website into the following categories: tablet accessories, consoles and computers, home and garden, business, gadgets, games, instruments and accessories, fireplace accessories, automotive, multimedia, lighting, clothing, footwear and jewelry, sports and fitness, phones and accessories, tourism and recreation, beauty, health, animals.ISO TRADE Spółka z oo Hangarowa 15 59-220 Legnica POLAND +48 666 002 003 b2b@maxy.eu

Instructions for use

Instructions for use of the product:

Assembly:

1. Unpacking and Assembly:
   • Carefully remove all lamps from the packaging.
   • Each lamp usually consists of three parts: the lamp head (with a solar panel and LED), the lamp body (the rod), and the spike for driving into the ground.
   • Assemble them by first attaching the tip to the lamp body, then the lamp body to the lamp head. Make sure all parts are firmly connected.
2. Switching on the lamp:
   • Before you stick the light into the ground, look for the on/off switch. This is usually located under the head of the light, below the solar panel (you may need to remove the top or open the cover).
   • Move the switch to the position "ON"This usually only needs to be done once, on first use.
3. Choice of Location:
   • Choose a location in your garden where it will be solar panel (on top of each lamp) received maximum direct sunlight at least 6-8 hours a day. Avoid shady places (under trees, bushes, in the shade of buildings) as this will reduce the efficiency of battery charging and therefore the operating time at night.
   • Make sure the lights are not covered with snow or leaves, as this will prevent charging.
4. Stab in the Earth:
   • Prepare the soil at your chosen location by loosening it.
   • Firmly drive the tip of each lamp deep into the ground to keep the lamp stable and upright. Do not apply too much force to the lamp head to avoid damaging it.

Application:

1. Automatic Operation:
   • Once the lights are installed and turned on, they will automatically charge during the day.
   • When darkness falls, the built-in light sensor will automatically activate the lamps, which will begin to emit warm white light.
   • At dawn, the lamps will automatically turn off and begin recharging.

Useful tips

Useful tips for assembly:

• Optimal Sun Exposure: Regularly check that the solar panel is not shaded or covered by dirt, leaves or snow. A clean panel ensures the best battery charging and maximum operating time at night.
• First Charging: Before first use and installation, leave the lights in direct sunlight for at least 10-12 hours in the “ON” position to fully charge the batteries. This ensures optimal performance upon first use and longer lasting brightness.
• Cleaning: Occasionally wipe the solar panel and LED head with a soft, damp cloth to remove dust and dirt.
• Winter Efficiency: During the winter months, when there is less sunlight and the days are shorter, the operating time of the lights may be reduced. This is normal for solar devices. To extend their lifespan and protect them from extreme cold, it is recommended to store them in a dry place indoors during the winter.
• Layout: Experiment with the spacing between the lamps to achieve the desired lighting effect and path illumination.

Warnings

Warnings:

– It is important to place the solar panel/solar lamp in a location with maximum sunlight. This location should be free of shadows and the risk of covering the solar panel.
– Avoid other lighting near the light chain, as it may interfere with the twilight sensor and the switching on and off of the lamp. Also, keep a distance (approx. 1,5 m) between subsequent solar lamps.
– Suitable locations for solar wall lights are the edges of lawns, flower beds, pergolas or shrubs/trees/facades. Adjust the position/attachment as necessary.
– Secure the solar lamp in a way that it cannot be damaged.
– Solar lighting will not be very intense and long-lasting if there is no all-day, intense access to sunlight.
– Make sure that the cables connecting the solar panel and the LEDs are not damaged and that the cable connection to the panel is secure.
– Make sure that the batteries and accumulators for solar lamps are fully charged.